Vogt Pneumatic Hammer VH 30 SET
The light equipment for all work on walls and ceilings
Vogt Pneumatic Hammer VH 30 SET
The light equipment for all work on walls and ceilings
Pneumatic hammers have been around for a long time and yet VOGT hammers are quite different: the lightweight, lance-shaped design offers ideal working conditions. The practical robustness, the high quality in material and workmanship and the low tool wear predestine for continuous use. A huge tool selection and the possibility to adapt the tool by handle exchange opens a multitude of further application possibilities. That is why VOGT hammers are often found in construction renovation.
VOGT Hammer VH 25 / VH 30 - the light one
The smaller VOGT Hammer VH 25 / VH 30 is often only half as heavy as comparable electric hammers, which simplifies overhead work. Already the VH 25-90 / VH 30-90 reaches the complete floor height without scaffolding. The higher impact frequency of the VH 25 / VH 30 is ideal for brittle materials: epoxy resin, plasters, fillers, thin tiles, tile adhesives, mortar and concrete residues. The small impact unit makes do with 190 liters per minute, which can even be handled by single-piston compressors.
Hammer VH 30-90 S basic set for renovators, painters, plasterers, tilers
Item number: VH30-90S
Scope of delivery:
-1 VOGT Hammer VH 30-90 vibration damped.
- 1 Delta-P blade b=100 mm (M410UP)
- 1 wide chisel b=40 mm (M340)
- 1 scraper holder with mounting kit (M5000)
- 1 scraper b=120 mm ground (B120S)
- 1 adapter from 3/4 inch to standard connection (Z200)
- 1 precision line lubricator (Z300)
- 1 compressed air hose 9x14 mm, l=10 m (Z110)
- 1 VOGT special oil 0,1 l (Z510)
- 1 ring wrench 15/19 mm deep cranked (861004)
- 1 working gloves (870005)
- 1 pair of safety goggles (870007)
- 1 earplug (870003)
- 1 Metal transport case (0XX030-60)
- 1 Instruction manual EN
Hammer VH 30-90 S XL-Set for renovators, painters, plasterers, tilers
Item number: VH30-90SXL
Scope of delivery:
- 1 VOGT Hammer VH 30-90 vibration damped
- 1 Delta-P blade b=100 mm (M410UP)
- 1 wide chisel b=40 mm (M340)
- 1 flat chisel b=25 mm (M200)
- 1 scraper holder with mounting kit (M5000)
- 1 scraper b=100 mm ground (B100S)
- 1 scraper b=120 mm ground (B120S)
- 1 scraper b=160 mm ground (B160S)
- 1 adapter from 3/4 inch to standard connection (Z200)
- 1 precision line lubricator (Z300)
- 1 compressed air hose 9x14 mm, l=10 m (Z110)
- 1 VOGT special oil 0,1 l (Z510)
- 1 VOGT special oil 1,0 l (Z500)
- 1 ring wrench 15/19 mm deep cranked (861004)
- 1 working gloves (870005)
- 1 safety goggles (870007)
- 1 earplug (870003)
- 1 Metal transport case (0XX030-60)
- 1 Operating Instructions EN
One unit of quantity corresponds to 1 piece!
Pictures may contain optional Accessories.
Pictures shown are for reference only, actual product may vary.
Deliverytime | approx. 3 - 5 working days |
---|---|
Hersteller | Vogt |
Herstellerartikelnummer | VH30-90S |
EAN | 4260534480167 |
Zuschlag für Lieferung nach Österreich (netto) | €0.00 |
Zuschlag für Lieferung in die Schweiz (netto) | €320.00 |
Zuschlag für Lieferung nach Niederlande (netto) | €0.00 |
Sperrgutzuschlag (netto) | |
Surcharge for delivery Italy | €0.00 |
Zuschlag für Lieferung nach Polen (netto) | €0.00 |
Zuschlag für Lieferung nach Dänemark (netto) | €0.00 |
Zuschlag für Lieferung nach Finnland (netto) | €0.00 |
Zuschlag für Lieferung nach Norwegen (netto) | €320.00 |
Zuschlag für Lieferung nach Schweden (netto) | €0.00 |
Energieeffizienzklasse | |
---|---|
Width [mm] | |
Length [mm] | |
Height [mm] | |
Gewicht [kg] | 0,00 |
Maximum power consumption in watts |