Construction Dryer

Powerful building dryers buy online

If water has penetrated into a building or after water damage, pure ventilation to dehumidify the masonry is far from sufficient. Even after completion of a new building, there is usually still a lot of moisture in the masonry and in the air. Rapid dehumidification by means of a suitable building dryer is then unavoidable. If dehumidification by means of a building dryer is not started immediately, the excess moisture can lead to mold growth and thus pose a serious health hazard. The result of starting a construction dryer too late can be serious illnesses such as asthma and allergies. In industry and commerce, construction dryers are also used to protect machinery and associated electronics from corrosion and condensation, for example, through dehumidification. In addition, in some industries, building dryers are central to controlling production conditions to ensure consistent product quality. So, to avoid damage to the building fabric, machinery or product, rapid dehumidification using a construction dryer is urgently needed. Since the time until the start of dehumidification determines the extent of later damage, it is advisable to always have a construction dryer on hand and not to buy it only when it is already urgently needed. Construction dryers are particularly powerful dehumidifiers, which are used especially often in trade and industry due to their high dehumidification performance. A high quality construction dryer can efficiently remove large amounts of moisture from the air and building fabric in a relatively short time.

Decision criteria when buying a construction dryer

When choosing a construction dryer, some important aspects should be considered. Since the purchase cost of a construction dryer varies depending on the model and performance, it should first be carefully considered where dehumidification is necessary and how much water has accumulated in the structure. This can prevent the new construction dryer from turning out to be a bad purchase due to an inappropriate and too low drying performance. Depending on this, the first selection criterion is, of course, thedehumidification performance of the construction dry er. Depending on the extent of the water damage, the dehumidification capacity of the construction dryer used must be selected appropriately. Since not every construction dryer can be used equally for all types of buildings, a suitable technology should be used to prevent damage to the building. At the same time, to protect the environment and avoid high energy costs, theenergy efficiency of the construction dry er should be considered. Likewise, the water collection tank of the construction dry er must have an appropriate size for a larger drying operation . Otherwise, this must be constantly emptied. However, most construction dryers also have a shut-off function that automatically turns the unit off when the container is full. If no one is on site for several hours, it is worth investing in a more expensive construction dryer with a hose connection. Furthermore, if the dehumidifier is used in an inhabited room, thenoise level generated by the device must not be too high. Otherwise, the quality of living would be negatively affected by the dryer. Some construction dryers also have special extras built in, such as air filters that filter out mold spores released during drying. In the service of energy efficiency, some construction dry ers also haveenergy recovery devices . If you want to save yourself a lot of nerves right from the start, you can make sure that the construction dry er iseasy to operate, clean and maintain when you buy it. Since construction dryers are often used in mobile applications, thedimensions and weight of the construction dryer are also decisive factors in the purchase decision for many customers . Some models even have rollers to make transport easier.

The most commonly used construction dryers are the so-called condensation dryers. This type of construction dryer dehumidifies by drawing in air and passing it through a cooling element, which consists of cooled fins. As a result, the water contained in the air condenses and can be collected in a water collection tank or discharged directly through a hose. Due to the cooling technology on which this type of construction dryer is based, condensation dryers cannot be used when room or outdoor temperatures are too cold. However, there are also adsorption dryers that reliably dehumidify even at the lowest temperatures. In addition, adsorption dryers have the advantage that a lower residual moisture content can be achieved than would be possible with a condensation dryer. Adsorption dryers have a rotor that absorbs moisture. This transports it to a heated part of the adsorption dryer. The heat causes the water to evaporate and can be removed. Most adsorption dryers have a hose to the outdoors, where the moisture is then removed. Less common models from the group of construction dryers are infrared and microwave dryers. The field of application of these construction dryers is somewhat more specialized. Infrared dryers are particularly suitable for very thick walls, while and microwavedryers are used mainly for sensitive, historic and listed buildings.

Buy construction dryers at Baushop-Express

Our broad portfolio of construction dryers from renowned manufacturers, such as Heylo and Wilms, gives you as a customer a choice where price and performance are in focus and in a reasonable ratio. If you do not only look at the price of the purchase when buying a construction dryer, but primarily at a Stark performance with low energy consumption, you will save costs and choose a model with optimal properties in use when buying a construction dryer. Wilms and Heylo focus on maximum performance and energy efficiency, as well as a compact design for flexible use with easy transport. It pays to rely on reputable manufacturers when buying a construction dryer and thus avoid all risks when buying a construction dryer. If you are unsure which of our construction dryers is the best choice for you, feel free to contact us by email, phone or via our contact form. Our competent customer consultants have many years of practical experience themselves and will be happy to help you. At Baushop-Express you get the best service, like at your local construction equipment dealer and still enjoy the advantages of online trading. You can get information around the clock at www.baushop-express.com and place your order. Delivery is then fast and uncomplicated to your home or directly to your company.