V.E.P. Plastering Machine VR6

Plastering machine VR6 - Universal mixing pump

Mixing pump for ready-mixed mortar for continuous processing of all machine-compatible, dry premixed ready-mixed materials such as interior and exterior plaster, insulating plaster, scratch plaster, grouting mortar, bulkhead filling compounds, up to grain size 3 mm.

The dry mortar is conveyed into the mixing pump (mixing tube) and mixed under metered water supply. Directly afterwards, the mixed material is conveyed through the material hose by a highly wear-resistant and extremely pressure-stable worm pump.

Technical data:

Connection 400 V/ 32A; fuse protection 3 x 25 A
pump motor 400 V/50 Hz, 0.55 kW, 400 rpm
cellular wheel motor 400 V/50 Hz, 0,55 kW, 28 rpm
water connection 3/4" at least 2,5 bar with running machine
Delivery rate 5 - 85 l/min depending on pump type
diaphragm compressor Handy K2 with pressure cut-off 0,9 kW/0,25Nm³/min
Spraying capacity 22 l/min as standard (delivery rate 5 - 85 l/min depending on pump type)
Spraying unit 25 mm
Delivery distance with 25 mm hose diameter max 30 m, standard; (with 35 mm hose diameter max 50 m; tile screed up to approx. 80 m)
operating pressure max 30 bar
Motor protection bracket
4 carrying handles

Scope of delivery: Including 10 m mortar hose DN2 5/SKV24, 11 m air hose 1/2"/GK, on-board tools, mixer cleaner, cleaner shaft and sponge rubber ball 30 mm

One quantity unit corresponds to 1 piece!
Pictures may contain optional Accessories.
The pictures shown are for reference only, the actual product may differ.