The shaft-mounted agitator swirls the fluid and ensures that silt, sand and slurry are pumped without problems
For liquids containing silt, sand water, ground water in construction pits and foundation trenches
Powerful silt pump with agitator from Tsurumi
The particularly powerful Tsurumi KTV 2 is made of the most modern materials and can therefore be used reliably in all extreme situations and is low-maintenance and durable.
The pump casing, for example, is made of a special rubber, while the impeller is made of chrome cast iron.
Since the lower part of the pump can be disassembled with only one wrench, maintenance of the unit is very easy.
The KTV 2-8, KTV 2-15 and KTV 2-22 models differ in their motor power, head and flow rate, and dry weight.
The two models KTV 2-50 and KTV 2-80 are additionally equipped with an agitator that reliably whisks solid components of the medium and can therefore also easily convey silt, sludge, sand and bentonite.
Various technologies developed by Tsurumi ensure that the KTV pumps are absolutely safe to run dry and can therefore be used unattended for several hours.
The overhead discharge ensures that the motor is cooled even with smaller amounts of water.
Thanks to the patented oil distributor, the mechanical seal of the unit is always reliably lubricated.
In case of overheating of the motor or similar, various safety mechanisms take effect, which additionally extend the service life of the pump.
Advantages at a glance
KTV 2-50 and KTV 2-80 with agitator
Easy maintenance
Long service life
discharge connection: 2'' AG
Motor power: 2,0 kW
Rated current: 3,8 A
Delivery head: 20.0 m
Delivery rate: 420 max. l/min
Dry weight without cable: 25,0 kg
Diameter of sieve hole: 10 mm
Immersion depth: 25 m
Cable length: 20 m
discharge connection: 3'' AG
motor power: 3,0 kW
Rated current: 6,1 A
Delivery head: 22,5 m
Delivery rate: 720 max. l/min
Dry weight without cable: 38,0 kg
Diameter of sieve hole: 10 mm
Immersion depth: 25 m
Cable length: 20 m
1 unit of quantity corresponds to 1 piece.
The pictures shown are for reference only, the actual product may differ.
Deliverytime | approx. 3 - 5 working days |
---|---|
Hersteller | Tsurumi |
Herstellerartikelnummer | KTV2-50 |
EAN | |
Zuschlag für Lieferung nach Österreich (netto) | €0.00 |
Zuschlag für Lieferung in die Schweiz (netto) | €0.00 |
Zuschlag für Lieferung nach Niederlande (netto) | €0.00 |
Sperrgutzuschlag (netto) | |
Surcharge for delivery Italy | €0.00 |
Zuschlag für Lieferung nach Polen (netto) | €0.00 |
Zuschlag für Lieferung nach Dänemark (netto) | €0.00 |
Zuschlag für Lieferung nach Finnland (netto) | €0.00 |
Zuschlag für Lieferung nach Norwegen (netto) | €0.00 |
Zuschlag für Lieferung nach Schweden (netto) | €0.00 |
Height [mm] | |
---|---|
Width [mm] | |
Length [mm] | |
Gewicht [kg] | 0,00 |
Energieeffizienzklasse | |
Drive mode | |
Engine power [kW] | |
Rated voltage [V] | |
Rated current [A] | |
Flow rate max. [l/min] | |
Delivery pressure [bar] | |
Immersion depth max [m] | |
Discharge nozzle | |
Diameter sieve hole [mm] | |
Cable length [m] | |
Max. permissible solids size [mm] | |
Max liquid temperature [°C] |