ProNivo rotating lasers PNRLR/G-3D manual tilt; horiz./vert./vert.
Application:
Due to the horizontal beam and the two vertical rotating beams, the PNRLR/G-3D is suitable for all work in structural and civil engineering, but also in interior construction. Setting up sectional scaffolding, installing drywall, 90° angle transfer, suspending ceilings, aligning columns, foundations and walls are just a small sample of your possibilities with this innovative rotating lasers. Further application possibilities: Elevation outline, depth control during excavation, alignment of axes on the construction site, grading work, leveling.
Features:
- Innovative rotating lasers with three rotating heads.
- Unique, innovative rotating lasers with three rotating heads - 3 dimensions in one device!
- Optionally with red or green laser beam
- Highest accuracy due to electronic leveling
- Horizontal and two vertical rotation beams at 90° angle
- Inclination in one axis
- All functions and inclination settings can be remote controlled
- Plumb point as laser cross above and below
- Scanning function and height alarm
Special features:
Especially recommend the PNRLG-3D with three green rotating beams to your customers for interior work! You benefit from higher accuracy than with line lasers. With the high rotation speed of the PNRLG-3D you will see a continuous line! The two vertical beams allow you to use all references, laser crosses, plumb points and the horizontal leveling beam. No need to flip the laser, no need to set up again, no need for additional rotating lasers. One device for all axes! With the alignment base you can rotate the vertical beams around the plumb point! Really innovative!
Scope of delivery:
- Rotating lasers PNRLR-3D (red) or PNRLG-3D (green)
- Lithium-ion battery and charger
- Target plate
- Laser goggles
- Remote control
- Carrying case
- Instruction manual
Technical Data
Leveling accuracy | ± 3 mm/30 m |
Rotation beam | horizontal and 2x vertical |
Compensation range | ± 4° |
Tilt range | in one axis -4° to +4 |
Working range | Up to 500 m radius with handheld receiver |
Laser class | 2 (red 635 nm, green: 520 nm) |
Power supply | Lithium-ion batteries (12 - 25 h) |
Operating temperature | -10°C to +45°C |
IP protection class | IP55 |
Rotation speed | 400, 800, 2.200 rpm |
Dimensions | 215 mm (length) x 150 mm (width) x 156 mm (height) |
Weight | 2.1 kg |
PNLUD18 | Universal handheld receiver for rotary and line lasers.
Features:
- Further development of the predecessor model Universal handheld receiver PNLUD14 for almost all rotating/line lasers.
- Compact, lightweight unit with 60 mm large receiving field
- Stark, far visible LEDs and interval tones for height indication
- Three accuracy levels selectable
- Filter against flash and sunlight
- Display with 5 channels front and rear
- Mode and reception frequency are stored
- Magnets for mounting on steel profile
- Very stable clamp with screw fixing
- Power supply with only one AA battery
- Red - Green
- rotation - line
Technical specifications:
Height of the receiving field | 60mm |
Receiving angle | ± 45°< |
Accuracy (mm) | |
Fine | 0,3 |
Medium | 1 |
Coarse | 3 |
Volume | Normal/Loud/Off < |
Working range rotating lasers | Up to 400 m < |
Working range line laser | Up to 75 m |
Rotating lasers reception | at 300-1,200 rpm |
Line laser reception | 7 to 12 kHz |
Automatic shutdown | After 30 minutes |
Power supply | 1 x 1.5 V AA battery |
Operating time | For approx. 50 h |
Operating temperature | -10°C to +50°C |
IP protection class | IP67 |
Retaining clip:
The holding clamp of the PNLUD18 is characterized by particular robustness.
It can be clamped quickly, saves time and can be mounted precisely on various materials and shapes.
Application:
Receiving rotary and line lasers and measuring the difference in height.
The device receives red and green rotation laser beams as well as red and green line laser beams
Scope of delivery
- PNLUD18 handheld receiver
- Retaining clip
- 1 AA battery
PNRLD-MM handheld receiver with millimeter display
Features
- Digital display of height difference in millimeters
- Very large 90 mm receiving field
- Programmable offset in the receiving field
- Extreme robustness for construction
- Very small, compact and easy to use
- Anti-flash sensor against the Einfluss of warning lights on the construction site
- High-auflciency photodiode with anti-reflection technology
- Suitable for red lasers
- Rotation - millimeter
Technical data
Receiving range | 1 m - 300 m (depending on rotating lasers) |
Height of the receiving field | 90 mm |
Receiving angle | ± 70° |
Channels | 9 |
Accuracy (mm) | |
Fine | 1,0 |
Medium | 2,0 |
Coarse | 5,0 |
Very coarse | 10,0 |
Laser wave range | 450 nm to 800 nm |
Power supply | 1 x 1.5 V AA battery |
Operating time | 50+ hours |
Dimensions (without clamp) | 134 x 69 x 25 mm |
Weight (without clamp) | 175 g |
Operating temperature | -20°C to +50°C |
IP protection class | IP67 |
Special feature - programmable offset
With the programmable offset you can set the zero point as you need it: between -10 and +45 mm of the receiving field. For example, if the laser planes you want to receive are usually higher than the receiver, offset the zero line accordingly. This way you will get an indication much earlier how many millimeters are still missing to zero.
Holding clamp
The holding clamp of the PNRLD-MM is characterized by special robustness. It can be clamped quickly, saves time and can be mounted precisely on various materials and shapes.
Application
Reception of rotating lasers and millimeter-precise measurement of the height difference
Scope of delivery
- Millimeter handheld receiver PNRLD-MM
- Clamp
- 1 AA battery
Hand receiver 213-RD200 for laser
Professional and solid hand receiver for rotating lasers SLR200H and HV.
This stable and loud hand receiver allows you to work even at longer distances or in light conditions where you cannot see the laser beam of the rotating lasers. Mounting on round, oval or even angular measuring rods or profiles is no problem thanks to the universal mount.
- Two sensitivity levels
- Very robust staff clamp
- Bubble level for precise alignment
- Clear keypad with on/off button
- Sensitivity button and volume button
- Rubber armor for shock protection and splash-proof seal
- Battery compartment for 9 V battery on the rear side
- Automatic switch-off after 5 - 8 minutes
- Direction memory (display of the side at which the laser light left the laser reception area)
- Available for red and green laser beams
Mounting bracket
Mounting on round, oval or even angular measuring rods or profiles is no problem thanks to the universal mounting bracket.
Application
Reception of rotating lasers and measurement of height difference
Technical data:
Accuracy | 1,5 mm (high) or 2,5 mm (low) |
Height of the receiving window | 46 mm |
Volume | normal/loud/off |
Power supply | 9V alkaline battery |
Operating time | more than 20 h |
Operating temperature | -20° to +50°C |
IP protection class | IP44 |
Scope of delivery
- Hand receiver RD200 or RD200-G for green laser
- Retaining clip
- 9V block battery
Have a look at our universal hand receiver PNLUD18, which can receive rotating lasers as well as line lasers.
One unit of quantity equals 1 piece!
Pictures may contain optional Accessories.
Pictures shown are for reference only, actual product may differ.
Deliverytime | approx. 3 - 5 working days |
---|---|
Hersteller | ProNivo |
Herstellerartikelnummer | S205-PNRLR-3D-1 |
EAN | |
Zuschlag für Lieferung nach Österreich (netto) | €0.00 |
Zuschlag für Lieferung in die Schweiz (netto) | €120.00 |
Zuschlag für Lieferung nach Niederlande (netto) | €0.00 |
Sperrgutzuschlag (netto) | |
Surcharge for delivery Italy | €0.00 |
Zuschlag für Lieferung nach Polen (netto) | €0.00 |
Zuschlag für Lieferung nach Dänemark (netto) | €0.00 |
Zuschlag für Lieferung nach Finnland (netto) | €0.00 |
Zuschlag für Lieferung nach Norwegen (netto) | €120.00 |
Zuschlag für Lieferung nach Schweden (netto) | €0.00 |
Energieeffizienzklasse | |
---|---|
Width [mm] | |
Length [mm] | |
Height [mm] | |
Gewicht [kg] | 0,00 |
Maximum power consumption in watts |