PROBST telescopic screeding system TAS-UNI
Stepless telescopic handscreeding system
The telescopic screeding system TAS-UNI with its highly variable working width from 75 to 600 cm facilitates enormously the creation of a subgrade on large as well as on smaller construction sites. Thanks to its low own weight of max. 78 kg, it can be operated both manually and with the help of a machine. When used manually, standard shovels can be hooked into the system and used for pulling. Thanks to the intelligent design of the high-quality aluminum profiles with a protruding cutting edge, the surface can be pulled off in just one operation. Especially in case of coarse material distribution, the profile height of 280 mm is of great benefit, because thanks to it, a lot of material is taken along for distribution. The aluminum stripping profiles are all individually telescopic.
On the sides of the puller system there are height-adjustable roller units and pulling elements. The tread plate on the roller units can be used during mechanical use of the stripping system to increase the ground pressure. In addition, the side scraper plate ensures that residues on the height gauge are also neatly leveled.
Advantages at a glance:
-
Extremely lightweight
-
Suitable for large and small construction sites
-
Can be operated mechanically and manually
-
Clean leveling even with coarse material distribution
Scope of delivery:
TAS-UNI-450: Recommended basic equipment: 1 each aluminum profile 750, 1,000, 1,750, 2,000 mm long with integrated clamp adjustment 1 set = 2 side sections with height-adjustable roller via crank, guide plate and scraper with integrated fastening for the respective segments with suspension device for shovel as pulling element. 2 pcs. pulling chains, incl. fastening elements.
TAS-UNI-600: Basic equipment as above, but additionally 1 aluminum profile element 3,000 mm long.
Important features:
TAS-UNI 450 width max. 4500 mm:
Design: TAS-UNI 450
Max. width: 4500 mm
Weight: 85 kg
Manufacturer: Probst
Manufacturer Code: 51000042
EAN: 4054979376310
TAS-UNI 600 Width max. 6000 mm:
Version: TAS-UNI 600
max. width: 6000 mm
weight: 110 kg
Manufacturer: Probst
Manufacturer part no.: 51000043
EAN: 4054979376334
One quantity unit corresponds to 1 piece!
Pictures may contain optional extras.
Pictures shown are for reference only, actual product may vary.
