Gann Hydromette UNI Sets

GANN Building Moisture Meters Hydromette UNI

The UNI Hydromettes are electronic multi-purpose measuring instruments for recording building moisture, air humidity and temperature.

For building materials (e.g. screeds, mortars, plasters, concrete, bricks, insulating and insulating materials) the capacitive measuring method is used. With this method or operating mode, non-destructive testing of affected areas is possible.

For climate measurements (air humidity and air temperature), the high-quality Gann electrodes of the RF-T and RH-T series can be connected.

Besides air temperature, surface temperatures (based on Pt100 or infrared) and material temperatures (also based on Pt100) can be measured.

The UNI Hydromettes are particularly suitable for insurance companies, air conditioning technicians and water damage restoration companies. They are also the ideal complement to a wood moisture meter.

The connection of the following (active) electrodes is possible:

• B 50, B 60, LB 71 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.
• IR 40 EL for detection of surface temperature, thermal bridges and dew point temperature
• RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex for air humidity and air temperature measurement and
• all Gann Pt100 temperature sensors

With LCD display

---

Uni 1 Set 1 - B 50

Item number: 30002436

The UNI 1 is an electronic universal triple measuring instrument to which a wide range of active electrodes can be connected for measuring building moisture, air humidity and temperature.

• Handy moisture meter for fast single and serial measurements
• Precise measurement of air, surface and material temperature using Pt100 sensors in four-wire circuitry
• The use of an infrared sensor allows non-contact measurement of surface temperatures
• The device is delivered with 9 V battery

Technical data

Measuring ranges
Building humidity	5 - 98 % r.h. resp. 0.2 - 3.7 % by weight with RH-T 37 EL /RH-T 37 EL flex
Humidity	0 - 100 % r.h. with RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex
Temperature	-50 to +600 °C depending on Pt100 temperature sensor
Infrared measuring range	-20 to +199.9 °C with IR 40 EL
Dimensions
Length	0,140 m
Width	0,090 m
Height	0,050 m
Weight	0,230 kg

Scope of delivery: With active electrode B 50 and stand-by case BK 14-I

---

Uni 2 Set 1 - M 6

Item number: 30002550

The UNI 2 is an electronic universal triple measuring instrument to which a wide range of active electrodes for measuring building moisture, air humidity and temperature can be connected.

In addition, all building moisture measuring electrodes based on the resistance measuring principle can be used with the UNI 2.

• Handy moisture meter for fast single and serial measurements
• Wide range of applications for building moisture measurements due to the possibility of connecting all resistance-based and capacitive electrodes
• Precise measurement of air, surface and material temperature by Pt100 sensors in four-wire circuitry
• The use of an infrared sensor allows non-contact measurement of surface temperatures
• The instrument is supplied with 9 V battery

Technical data

Measuring ranges
Building moisture	relative building moisture in the borehole 5 - 98 % r.h. resp. 0.2 - 3.7 % by weight with RH-T 37 EL /RH-T 37 EL flex
	Capacitive measurements 0 - 199 digits (scan range) 0.3 - 8.5 wt.% resp. 0.3 - 6.5 CM-% with B 50, B 60, LB 71
	Resistance based measurements 0 - 80 digits 0.5 - 25 wt.% resp. 0.3 - 12 CM-%
Humidity	0 - 100 % RH with RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex
Temperature	-50 to +600 °C depending on Pt100 temperature sensor
Infrared measuring range	-20 to +199.9 °C with IR 40 EL
Dimensions
Length	0,140 m
Width	0,090 m
Height	0,050 m
Weight	0,230 kg

Scope of delivery: measuring instrument, pair of electrodes M6, contact ground, measuring cable MK8, in ready case.

---

One unit of quantity corresponds to 1 piece.

Pictures contain optional Accessories

The pictures shown are for reference only, the actual product may differ.