REMKO fresh water stations are used for hygienic drinking water preparation in connection with buffer storage tanks.
Remko fresh water stations EFS series
Central water heating
Remko fresh water stations EFS 20.1 - EFS 35.1 - EFS 50.1
Item number:
- EFS 20.1: 260180
- EFS 35.1: 260181
- EFS 50.1: 260180
The REMKO fresh water stations are used for hygienic drinking water preparation in connection with buffer storage tanks. The units are complete with electronic control, speed-controlled high-efficiency pump, flow switch and plate heat exchanger. The heat exchanger is designed for a large flow rate of 18 l/min (EFS 20.1), 32 l/min (EFS 35.1) or 50 l/min (EFS 50.1).
By cascading the EFS 35.1 or EFS 50.1 to the EFS 35.1/50.1 Duo, the pouring capacity can be increased to 64 l/min or 100 l/min respectively. The fresh water stations are supplied ready for installation in an EPP housing for wall mounting.
Variant | EFS 20.1 | EFS 35.1 | EFS 50.1 |
---|---|---|---|
Installation location | Storage tank/wall | Wall | Wall |
Cascade pipe assembly | FALSE | FALSE | FALSE |
Min. buffer volume WW operation | 500 L | 800 L | 1000 L |
Connections primary | 3/4 | 1 1/2 | 2 |
Connections secondary | 3/4 | 1 | 1 1/4 |
Operating temperature | +2 to +95 °C | +2 to +95 °C | +2 to +95 °C |
Height with insulation | 539 mm | 795 mm | 795 mm |
Width (with insulation) | 308 mm | 602 mm | 602 mm |
Depth (with insulation) | 324 mm | 298 mm | 298 mm |
Insulation | EPP | EPP | EPP |
Max. Pressure primary | 3 bar | 3 bar | 3 bar |
Max. Pressure secondary | 10 bar | 10 bar | 10 bar |
Primary pump | HE pump | HE pump | HE pump |
Secondary pump | HE pump | HE pump | HE pump |
Gravity brake | 200 | 200 | 200 |
Discharge rate 45°C /50°C | 16 l/min | 32 l/min | 50 l/min |
Pouring rate 45°C/60°C | 28 l/min | 50 l/min | 77 l/min |
Pouring rate 45°C/70°C | 38 l/min | 64 l/min | 88 l/min |
Type Fresh water station | Fresh water module | Fresh water module | Fresh water module |
Heat exchanger | Stainless steel | Stainless steel | Stainless steel |
Weight | 13 kg | 24.3 kg | 33 kg |
Remko fresh water station EFS 25
Item number: 260155
For hygienic hot water preparation in connection with a Remko HPS 500,MPS 800 or MPS 1000 storage tank. For mounting on the buffer tank or optionally for wall mounting. Complete with control, speed controlled Grundfoss pump, sensors flow meter gravity brakes, ball valves for shutting off the primary and secondary circuit and a plate heat exchanger. Minimum water volume for WW production 500L. Upstream control, with the possibility of controlling the Remko circulation pump to the EFS 25 with a 0-10 volt control.
Technical data:
Primary circuit:
- Buffer tank flow 3/4" IT
- Return buffer tank 3/4" IT
- Max.pressure, primary bar 3
Secondary circuit
- Hot water outlet 3/4" flat seal
- Cold water inlet 3/4" flat seal
- Max.pressure, secondary bar 10 bar
- Perm. operating temperature °C 2-95
- Gravity brake mmWs 200
- Flow rate sensor VFS 2.40
- Temperature sensors Pt 1000
- Mains connection Primary circuit
- Buffer tank flow 3/4" IT
- Buffer tank return 3/4" IT
- Max. pressure, primary bar 3
Secondary circuit
- Hot water outlet 3/4" flat seal
- Cold water inlet 3/4" flat seal
- Max.pressure, secondary bar 10 bar
- Perm. operating temperature °C 2-95
- Gravity brake mmWs 200
- Flow rate sensor VFS 2.40
- Temperature sensors Pt 1000
- Mains connection V/~ 230/1
- Mains frequency Hz 50/60
- Current at 1~230V A 0,06-0,58
- Tapping volume at 45 °C tapping temp. and 50 °C storage temp. l/min 12
- Tap quantity at 45 °C tap temp. and 60 °C storage temp. l/min. 20
- Tap quantity at 45 °C tap temp. and 70 °C storage temp. l/min. 26
Remko fresh water station EFS 35
Item number: 260156
- For hygienic hot water preparation in conjunction with a Remko MPS 800 or MPS 1000 storage tank. For wall mounting. Complete with control, speed controlled Grundfoss pump, sensors volume flow meter gravity brakes, ball valves for shutting off the primary and secondary circuit and a plate heat exchanger. Minimum water volume for WW preparation 800L.
- Upstream control, with the possibility of controlling the Remko circulation pump to the EFS 35 with a 0-10 volt control.
Technical data:
Primary circuit:
- Flow buffer tank 1 1/2" AG
- Return buffer tank 1 1/2" AG
- Max.pressure, primary bar 3
Secondary circuit
- Hot water outlet 1" leak tight
- Cold water inlet 1" shaft sealing
- Max.pressure, secondary bar 10
- Perm. operating temperature °C 2-95
- Gravity brake mmWs 2x800
- Heat exchanger 40 plates
- Flow rate sensor l/min 1-80
- Temperature sensors Pt 1000
- Energy efficiency index(EEI) = 0.23
- Power supply V/~/Hz 230/1/50
- Current at 1~230V A 0,06-0,58
- Tap flow at 45 °C tap temp. and 50 °C storage temp. l/min 21
- Tap volume at 45 °C tap temp. and 60 °C storage temp. l/min. 32
- Flow rate at 45 °C tapping temp. and 70 °C storage temp. l/min. 40
Remko fresh water station EFS 50
Item number: 260157
- For hygienic hot water preparation in conjunction with a Remko MPS 1000 storage tank. For wall mounting. Complete with control, speed controlled Grundfoss pump, sensors volume flow meter gravity brakes, ball valves for shutting off the primary and secondary circuit and a plate heat exchanger. Minimum water volume for WW production 1000L.
- Upstream control, with the possibility of controlling the Remko circulation pump to the EFS 50 with a 0-10 volt control.
Technical data:
Primary circuit:
- Flow buffer tank 2" AG
- Return buffer tank 2" AG
- Max.pressure, primary bar 3
Secondary circuit
- Hot water outlet 1 1/4" flat seal
- Cold water inlet 1 1/4" flat seal
- Max.pressure, secondary bar 10
- Perm. operating temperature °C 2-95
- Gravity brake mmWs 2x400
- Heat exchanger 60 plates
- Flow rate sensor l/min 1-80
- Temperature sensors Pt 1000
- Energy efficiency index(EEI) = 0.23
- Power supply V/~/Hz 230/1/50
- Current at 1~230V A 0,06-0,58
- Tap volume at 45 °C tap temp. and 50 °C storage temp. l/min 50
- Tap volume at 45 °C tap temp. and 60 °C storage temp. l/min. 77
- Tap quantity at 45 °C tap temp. and 70 °C storage temp. l/min. 88
Remko fresh water station EFS 35 Duo incl. cascade pipe assembly
Item number: 260158
Set consists of:
- Pipe connection set for cascading two EFS 35 fresh water stations.
- Includes two 2-way valves with connection cable.
- Connection primary side: 2x 1½'' male thread.
- Connection secondary side: 3x 1'' AG
- 260156 Fresh water station EFS 35
- For hygienic hot water preparation in connection with a Remko MPS 800 or MPS 1000 storage tank. For wall mounting. Complete with control, speed controlled Grundfoss pump, sensors volume flow meter gravity brakes, ball valves for shutting off the primary and secondary circuit and a plate heat exchanger. Minimum water volume for WW preparation 800L.
- Upstream control, with the possibility of controlling the Remko circulation pump to the EFS 35 with a 0-10 volt control.
Technical data:
Primary circuit:
- Flow buffer tank 1 1/2" AG
- Return buffer tank 1 1/2" AG
- Max.pressure, primary bar 3
Secondary circuit
- Hot water outlet 1" leak tight
- Cold water inlet 1" shaft sealing
- Max.pressure, secondary bar 10
- Perm. operating temperature °C 2-95
- Gravity brake mmWs 2x800
- Heat exchanger 40 plates
- Flow rate sensor l/min 1-80
- Temperature sensors Pt 1000
- Energy efficiency index(EEI) = 0.23
- Power supply V/~/Hz 230/1/50
- Current at 1~230V A 0,06-0,58
- Tap flow at 45 °C tap temp. and 50 °C storage temp. l/min 21
- Tap volume at 45 °C tap temp. and 60 °C storage temp. l/min. 32
- Flow rate at 45 °C tapping temp. and 70 °C storage temp. l/min. 40
One quantity unit corresponds to 1 piece!
Pictures may contain optional Accessories.
The pictures shown are for reference only, the actual product may differ.
Deliverytime | approx. 3 - 5 working days |
---|---|
Hersteller | Remko |
Herstellerartikelnummer | 260155 |
EAN | 4026415056858 |
Zuschlag für Lieferung nach Österreich (netto) | €120.00 |
Zuschlag für Lieferung in die Schweiz (netto) | €390.00 |
Zuschlag für Lieferung nach Niederlande (netto) | €120.00 |
Sperrgutzuschlag (netto) | |
Surcharge for delivery Italy | €180.00 |
Zuschlag für Lieferung nach Polen (netto) | €180.00 |
Zuschlag für Lieferung nach Dänemark (netto) | €180.00 |
Zuschlag für Lieferung nach Finnland (netto) | €180.00 |
Zuschlag für Lieferung nach Norwegen (netto) | €390.00 |
Zuschlag für Lieferung nach Schweden (netto) | €180.00 |
Energieeffizienzklasse | |
---|---|
Width [mm] | |
Length [mm] | |
Height [mm] | |
Gewicht [kg] | 0,00 |
Maximum power consumption in watts |