Atlas Copco Weda S08N Sludge Pump

Sludge pump with cast iron vortex impeller

The Atlas Copco Weda sludge pump S08N with its cast iron vortex impeller enables fast and efficient dewatering even with water mixed with solids and sand. Sediments up to a size of 25 mm can easily pass the pump casing. The pump is equipped with a condenser that provides high torque. The motor is protected by a sophisticated system over the entire running time. In case of overload or overheating, the motor shuts down automatically.

This Atlas Copco pump also features a unique sealing system. The double mechanical shaft seal is made of the extremely hard and heat-resistant material silicon carbide. An additional lip seal supports the primary seal and ensures a longer service life of the same. Threaded discharge nozzles are included in the standard delivery of the unit. Another special feature is the easy maintenance of Weda pumps. The modular design allows easy separation of the individual pump parts, and the uniformly selected one-size bolts and nuts can be loosened and tightened with only one tool.

The Weda S sludge pump is available in two versions with different capacities. While the WedaS04N pumps 270 l of dirty water per minute, the WedaS08N can pump 325 l in the same time.

Advantages at a glance

• Suitable for water containing sediments

• Motor protection

• Unique sealing system

• Pressure port: Storz-C

• Motor power: 1,2 kW

• Voltage: 230 Volt

• Rated current: 5,2 A

• weight: 13,0 kg

• Cable length: 10 m

• Max. Delivery volume: 317 l / (min 19.00 cbm/h)

• Max. Head: 13 m

• Max. permissible solids size: 25 mm

• Max. Immersion depth: 5,0 m

• Max. Fluid temperature: 35 °C
• Max. liquid density Liquid density: 1100 kg/m³
• Liquid pH value between 6.5-8.0
• Motor insulation class: E(+120°C)
• Termo protection in motor: yes

Standard scope of delivery:

1 x Storz-C coupling with 2 " IG for screwing on