Remko Oil Heater with Oil Burner CLK 30 Heating Capacity 26.5 kW

REMKO oil heater CLK series

---

Wide range of applications in construction heating
The automatic heaters of the CLK series bring the necessary heat to the desired places in case of sudden cold spells or unpostponable deadline work. This makes the company independent, because on-time construction requires that work can also be carried out during the cold season. Then buildings, materials and workplaces must be protected. The mobile units only need to be in place during the desired operating time to provide immediate heat without lead time when needed.

• Fan-oil burner, brand name of our choice, can be replaced in minutes
• Extremely low flue gas losses, resulting in high combustion efficiency and optimum economy
• Plug connection for room thermostatic control
• Electric oil preheating
• Closed combustion cladding
• Suitable for firing with biodiesel B7/B10 and HVO biofuel
• Single-line design as standard

To make it green and blooming
No other heating system can be used in glass or film greenhouses as optimally as our automatic heaters. This applies on the one hand to the exact determination of the suitable device with regard to greenhouse size as well as heat output and on the other hand to the desired operating time. When needed, the devices generate heat without lead time like conventional hot water heating systems or other heating systems. This means reduction of energy demand and thus considerable cost savings.

Numerous options for warm air distribution
The CLK series of units can be described without exaggeration as real powerhouses. They are the most powerful mobile REMKO heaters with specially optimized sickle fans. Powerful with high delivery pressure for connecting warm air hoses.

Scope of delivery:
Automatic heater including two-line drum fitting with oil filter and 5 m oil hose, without optional extra.

---

Remko CLK 30 with oil burner

Technical data:

Nominal heat input max.	29 kW
Nominal heat output	26.5 kW
air delivery	1760 m³/h
Pressure max.	90 Pa
Fuel	fuel oil EL/diesel
Fuel consumption, fuel oil max	2.85 l/h
Oil nozzle, Danfoss	0.6 / 60 °S
Connection / pump pressure	11 bar
Exhaust gas loss max.	9 %
Power supply	230/1~/50
Power consumption max.	0.37 kW
Rated current consumption max.	1.8 A
Air outlet Ø	300
Exhaust port Ø	150 mm
Dimensions H/W/D	1000/660/1450 mm
Weight	126 kg

---

Remko CLK 50 with oil burner

Technical data:

Nominal heat input max.	46 kW
Nominal heat output	42 kW
air delivery	3050 m³/h
Max. pressure	145 Pa
Fuel	fuel oil EL/diesel
Fuel consumption, fuel oil max	4.5 l/h
Oil nozzle, Danfoss	1 / 60 °S
Connection / pump pressure	11 bar
Exhaust gas loss max.	9 %
Power supply	230/1~/50
Power consumption max.	0.42 kW
Rated current consumption max.	2 A
Air outlet Ø	300
Exhaust port Ø	150 mm
Dimensions H/W/D	1000/660/1450 mm
Weight	132 kg

---

Remko CLK 70 with oil burner

Technical data:

Nominal heat input max.	68 kW
Nominal heat output	62 kW
air delivery	4920 m³/h
Pressure max.	165 Pa
Fuel	fuel oil EL/diesel
Fuel consumption, fuel oil max	6.6 l/h
Oil nozzle, Danfoss	1.35 / 60 °S
Connection / pump pressure	12 bar
Exhaust gas loss max.	9 %
Power supply	230/1~/50
Power consumption max.	0.86 kW
Rated current consumption max.	4 A
Air outlet Ø	400
Exhaust port Ø	150 mm
Measurements H/W/D	1120/730/1610 mm
Weight	177 kg

---

Remko CLK 120 with oil burner

Technical data:

Nominal heat input max.	114 kW
Nominal heat output	105 kW
air delivery	8050 m³/h
Max. pressure	220 Pa
Fuel	fuel oil EL/diesel
Fuel consumption, fuel oil max	11.8 l/h
Oil nozzle, Danfoss	2.25 / 80 °S
Connection / pump pressure	12 bar
Exhaust gas loss max.	9 %
Power supply	230/1~/50
Power consumption max.	1.8 kW
Rated current consumption max.	8.2 A
Air outlet Ø	500
Exhaust port Ø	200 mm
Measurements H/W/D	1350/920/2100 mm
Weight	316 kg

---

Remko CLK 150 with oil burner

Technical data:

Nominal heat input max.	150 kW
Nominal heat output	138 kW
air delivery	9710 m³/h
Pressure max.	260 Pa
Fuel	fuel oil EL/diesel
Fuel consumption, fuel oil max	14.8 l/h
Oil nozzle, Danfoss	2.75 / 80 °S
Connection / pump pressure	14 bar
Exhaust gas loss max.	9 %
Power supply	230/1~/50
Power consumption max.	1.9 kW
Rated current consumption max.	8.8 A
Air outlet Ø	500
Exhaust port Ø	200 mm
Measurements H/W/D	1350/920/2100 mm
Weight	324 kg

---

One unit of quantity corresponds to 1 piece.
Pictures contain optional Accessories
The pictures shown are for reference only, the actual product may differ.