The perfect vacuum lifter, even for Stark porous materials such as concrete slabs, ...
The Turbo M-Levator is specially designed for manual lifting of Stark porous materials, such as natural stone or concrete slabs. The surface can be smooth or rough. The strong blower sucks immediately after placing on the slab.
The Turbo M-Levator releases the plate only when you want it to: for this purpose the lever is operated. Power is supplied from the mains 230V-50 Hz. The suction plate is sealed by an elastic rubber. The seal is self-adhesive and can be easily replaced when worn.
The device is equipped with a manometer to control the vacuum. Suction plates with a maximum load capacity of 200 kg can be easily changed using the two quick-release clamps. In accordance with EN 13155, the Turbo M-Levator can also be used in hoist operation with the hoist module (suspension eye, safety chain, chain box, protection against unintentional operation).
!! The various suction plates must be ordered separately in our accessories !!!
Features:
The vacuum lifter also for very porous and uneven material
Operation with alternating current 230 V - 50 Hz
For manual use / with adapter also for hoist operation
The Turbo-Levator can also be rented through our rental park
Special versions on request
Docking station with 5 m hose and handle
Hand vac HS 25 for load capacity up to 25kg*
Hand vac HS 40 for load capacity up to 40kg*
Single carrier for handle
Two-chamber system for HS 25, HS 40 *
Load capacity at a vacuum of min -0.2 bar.
Hoist operation
According to EN 13155, the Turbo M-Levator can be used with the hoist module (suspension eye, safety chain, chain box, safety device against unintentional operation), the Turbo M-Levator can also be used in hoist operation in the area close to the ground.
With the hydraulic module, the plate can also be rotated and released from the wheel loader.
Technical data:
Type
Measurements
mm
Load capacity
kg
Weight
kg
Turbo M-Levator basic unit with 5 m power cable 230 V-50 Hz
Hydraulic module for hydraulic rotating and releasing of the load, consisting of consisting of rotator and hydraulic cylinder for connection to the hydraulics of the carrier
4
Docking station HS with 5 m hose and handle
447 x 502
3
Single carrier HS
4,4
Two-chamber system for HS 20, HS 40, retrofit kit
One unit of quantity corresponds to 1 piece! Pictures may contain optional Accessories. The pictures shown are for reference only, the actual product may differ.