Weber Vibratory Tamper SRV

Weber Vibratory Tamper SRV

---

SRV 300

The new, particularly light SRV 300 vibratory tamper has been specially developed for tamping under pipes and conduits - for compaction in so-called pipe spandrels in trenches.

It can also be used for compacting edge areas in walkways or when installing drainage.

Technical data:

	SRV 300
Operating weight:	32 kg
Padfoot width:	14 cm
Stroke rate:	790 rpm.
Engine:	Honda GX 35 4-stroke gasoline
Engine power max:	1 kW (1.4 HP)

---

SRV 590 / 590 II

The SRV 590 vibratory rammer - the strong lightweight.

Its low weight (62 kg) facilitates transport and work on the construction site. At the same time, you can rely on the robust construction of the SRV 590.

Ten points for the SRV 590 tamper:

1. Balanced running characteristics and low hand-arm vibrations enable fatigue-free work.
2. Durable and powerful tamping system.
3. Four-stroke GXR 120 gasoline engine from Honda with low pollutant emissions.
4. Oil sensor checks oil pressure at startup and prevents engine from starting if oil is low.
5. Effective, multi-stage air filtration system with cyclone pre-separator protects engine from contamination.
6. Line and/or tank filters clean the fuel.
7. Throttle lever with detent steps for full throttle, reduced speed, idle and engine stop/fuel shut-off.
8. Maintenance-free tamping foot.
9. Easy transport with carrying handles and rollers.
10. Hour meter as standard.

Two-year warranty with no special restrictions (optionally extendable up to 5 years).

Technical data:

	SRV 590 / 590 II
Operating weight:	62 kg
Padfoot width:	28 cm / 20 cm
Stroke rate:	700 1/min.
Engine:	Honda GXR 120 (4-stroke gasoline)
Engine power, max:	2.7 kW (3.7 hp)

Available optional accessories:
Landing gear.

---

SRV 620/660 Hd

Robust and durable - that's what the SRV 620 vibratory tamper stands for.

With its high tamping and impact performance, the tamper compacts even faster and more effectively. Apart from the ramming performance, Weber MT again achieved advanced results in the area of operating comfort.
Modern motors, a narrow guide bar, and the optimized tamping foot take the strain off the operator and ensure the greatest possible comfort.

10 plus points for tamper SRV 620/660 Hd:

1. Balanced running characteristics and low hand-arm vibrations enable fatigue-free work.
2. Proven, powerful and durable ramming system.
3. Four-stroke gasoline engines (Honda GXR 120) with low pollutant emissions.
4. Effective, multi-stage air filtration system with cyclone pre-separator protects engine from contamination.
5. Line and/or tank filters clean the fuel.
6. Engine safely protected from stone chips.
7. Stable bellows mounted at a safe height.
8. Maintenance-free ram foot.
9. Throttle lever with detent steps regulates tamping power.
10. Hour meter as standard.

Two-year warranty with no special restrictions (optionally extendable up to 5 years).

Technical data:

	SRV 620	SRV 660 Hd
Operating weight:	66 kg	70 kg
Padfoot width:	28 cm (20 cm*)	28 cm
Stroke rate:	700 1/min.	700 1/min.
Engine:	Honda GXR 120 (4-stroke gasoline)	Honda GXR 120 (4-stroke gasoline)
Engine power, max:	2.7 kW (3.7 hp)	2.7 kW (3.7 hp)

* Optionally available with a tamping foot width of 20 cm.


Available optional accessories:
Chassis.

---

SRV Black Edition III

Working width:	20 cm
Weight:	63 kg
Type:	Vibrating tamper
Centrifugal force:	18,3 kN

---

One unit of quantity corresponds to 1 piece!
Pictures may contain optional Accessories.
The pictures shown are for reference only, the actual product may differ.