The automatic heaters of the CLK series bring the necessary heat to the desired places in case of a sudden cold snap or unpromptable deadline work. This makes you independent, because on-time construction requires that work can also be done during the cold season.
Wide range of applications in construction heating The automatic heaters of the CLK series bring the necessary heat to the desired places in case of sudden cold spells or unpostponable deadline work. This makes the company independent, because on-time construction requires that work can also be carried out during the cold season. Then buildings, materials and workplaces must be protected. The mobile units only need to be in place during the desired operating time to provide immediate heat without lead time when needed.
Fan-oil burner, brand name of our choice, can be replaced in minutes
Extremely low flue gas losses, resulting in high combustion efficiency and optimum economy
Plug connection for room thermostatic control
Electric oil preheating
Closed combustion cladding
Suitable for firing with biodiesel B7/B10 and HVO biofuel
Single-line design as standard
To make it green and blooming No other heating system can be used in glass or film greenhouses as optimally as our automatic heaters. This applies on the one hand to the exact determination of the suitable device with regard to greenhouse size as well as heat output and on the other hand to the desired operating time. When needed, the devices generate heat without lead time like conventional hot water heating systems or other heating systems. This means reduction of energy demand and thus considerable cost savings.
Numerous options for warm air distribution The CLK series of units can be described without exaggeration as real powerhouses. They are the most powerful mobile REMKO heaters with specially optimized sickle fans. Powerful with high delivery pressure for connecting warm air hoses.
Scope of delivery: Automatic heater including two-line drum fitting with oil filter and 5 m oil hose, without optional extra.
Remko CLK 30 with oil burner
Technical data:
Nominal heat input max.
29 kW
Nominal heat output
26.5 kW
air delivery
1760 m³/h
Pressure max.
90 Pa
Fuel
fuel oil EL/diesel
Fuel consumption, fuel oil max
2.85 l/h
Oil nozzle, Danfoss
0.6 / 60 °S
Connection / pump pressure
11 bar
Exhaust gas loss max.
9 %
Power supply
230/1~/50
Power consumption max.
0.37 kW
Rated current consumption max.
1.8 A
Air outlet Ø
300
Exhaust port Ø
150 mm
Dimensions H/W/D
1000/660/1450 mm
Weight
126 kg
Remko CLK 50 with oil burner
Technical data:
Nominal heat input max.
46 kW
Nominal heat output
42 kW
air delivery
3050 m³/h
Max. pressure
145 Pa
Fuel
fuel oil EL/diesel
Fuel consumption, fuel oil max
4.5 l/h
Oil nozzle, Danfoss
1 / 60 °S
Connection / pump pressure
11 bar
Exhaust gas loss max.
9 %
Power supply
230/1~/50
Power consumption max.
0.42 kW
Rated current consumption max.
2 A
Air outlet Ø
300
Exhaust port Ø
150 mm
Dimensions H/W/D
1000/660/1450 mm
Weight
132 kg
Remko CLK 70 with oil burner
Technical data:
Nominal heat input max.
68 kW
Nominal heat output
62 kW
air delivery
4920 m³/h
Pressure max.
165 Pa
Fuel
fuel oil EL/diesel
Fuel consumption, fuel oil max
6.6 l/h
Oil nozzle, Danfoss
1.35 / 60 °S
Connection / pump pressure
12 bar
Exhaust gas loss max.
9 %
Power supply
230/1~/50
Power consumption max.
0.86 kW
Rated current consumption max.
4 A
Air outlet Ø
400
Exhaust port Ø
150 mm
Measurements H/W/D
1120/730/1610 mm
Weight
177 kg
Remko CLK 120 with oil burner
Technical data:
Nominal heat input max.
114 kW
Nominal heat output
105 kW
air delivery
8050 m³/h
Max. pressure
220 Pa
Fuel
fuel oil EL/diesel
Fuel consumption, fuel oil max
11.8 l/h
Oil nozzle, Danfoss
2.25 / 80 °S
Connection / pump pressure
12 bar
Exhaust gas loss max.
9 %
Power supply
230/1~/50
Power consumption max.
1.8 kW
Rated current consumption max.
8.2 A
Air outlet Ø
500
Exhaust port Ø
200 mm
Measurements H/W/D
1350/920/2100 mm
Weight
316 kg
Remko CLK 150 with oil burner
Technical data:
Nominal heat input max.
150 kW
Nominal heat output
138 kW
air delivery
9710 m³/h
Pressure max.
260 Pa
Fuel
fuel oil EL/diesel
Fuel consumption, fuel oil max
14.8 l/h
Oil nozzle, Danfoss
2.75 / 80 °S
Connection / pump pressure
14 bar
Exhaust gas loss max.
9 %
Power supply
230/1~/50
Power consumption max.
1.9 kW
Rated current consumption max.
8.8 A
Air outlet Ø
500
Exhaust port Ø
200 mm
Measurements H/W/D
1350/920/2100 mm
Weight
324 kg
One unit of quantity corresponds to 1 piece. Pictures contain optional Accessories The pictures shown are for reference only, the actual product may differ.