Drainage pump KTZE series
- Suitable for use on construction sites
- Meets all necessary requirements on the construction site
- Result is a powerful pump that can withstand tough applications
- Discharge opening at the top:
The motor can be cooled even with small amounts of water. This arrangement allows the use of submersible pumps even when space is limited. The pump is safe to run dry (semi-submerged or slurping).
- Wear resistant:
All high wear parts are made of cast iron - making the KTZ series far superior to pumps of aluminum construction. At least 2 impellers with different performance curves are available for each motor rating
- Efficient motor cooling:
The pump has a slim design, the medium is led upwards along the motor. This design saves space and ensures sufficient motor cooling even in slurping mode
- Increased pressure resistance:
A newly developed mechanical seal allows immersion depths of up to 25m. This makes the use of this pump on the construction site even more flexible.
- Level controller (electrode): The KTZE series is equipped with a highly reliable and stable electrode - no moving parts! Unnecessary dry running is prevented, saving energy. When the electrode comes in contact with water, the pump starts. It stops after one minute when there is no more contact with water. Individual adjustment of the water level possible.
Scope of delivery: Including Storz coupling suitable for the external thread (=AG) of the discharge connection, 20 meters of cable and the corresponding motor protection plug (CEE16A or 32A, thermal release, magnetic release, rotating field control and phase inverter).
Note: Please specify when ordering which plug size you need 16 or 32 A ( from KZT 411 only 32A plug is possible)
Ifyou are looking for a construction site pump with Tsurumi KTZE series values without the level controller in the form of an electrode, click here.
Overview thread size in inch to the corresponding Storz coupling
| 2" male pressure couplings |
Storz-C coupling with 2" IT |
| 3 " AG pressure support |
Storz-B coupling with 3" IT |
| 4" AG pressure support |
Storz-A coupling with 4" IT |
| 6" AG pressure socket |
Storz-F coupling with 6" IT |
Important features Type KTZE21.5 Performance curve 1:
- discharge connection: 2" AG
- Motor power: 1,5kW
- Rated current A: 3,5A
- Delivery height max. m: 21,5m
- Delivery rate max. l/min: 430l/min
- Dry weight / without cable: 40,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max.: 25m
- Cable length: 20m
Important features Type KTZE31.5 Performance curve 2:
- Pressure port: 3" AG
- Motor power: 1,5kW
- Rated current A: 3,5A
- Delivery height max. m: 14,4m
- Delivery rate max. l/min: 670l/min
- Dry weight / without cable: 39,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max: 25m
- Cable length: 20m
Important features type KTZE22.2 performance curve 3:
- Pressure port: 2" AG
- Motor power: 2,2kW
- Rated current A: 5,0A
- Delivery height max. m: 26,0m
- Delivery rate max. l/min: 500l/min
- Dry weight / without cable: 42,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max.: 25m
- Cable length: 20m
Important features type KTZE32.2 performance curve 4:
- Pressure port: 3" AG
- Motor power: 2,2kW
- Rated current A: 5,0A
- Delivery height max. m: 20,4m
- Delivery rate max. l/min: 800l/min
- Dry weight / without cable: 41,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max.: 25m
- Cable length: 20m
Important features type KTZE23.7 performance curve 5:
- Pressure port: 2" AG
- Motor power: 3,7kW
- Rated current A: 7,7A
- Delivery height max. m: 36,5m
- Delivery rate max. l/min: 450l/min
- Dry weight / without cable: 71,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max: 25m
- Cable length: 20m
Important features type KTZE33.7 performance curve 6:
- Pressure port: 3" AG
- Motor power: 3,7kW
- Rated current A: 7,7A
- Delivery height max. m: 29,0m
- Delivery rate max. l/min: 900l/min
- Dry weight / without cable: 71,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max: 25m
- Cable length: 20m
Important features type KTZE43.7 performance curve 7:
- Pressure port: 4" AG
- Motor power: 3,7kW
- Rated current A: 7,7A
- Delivery height max. m: 18,0m
- Delivery rate max. l/min: 1440l/min
- Dry weight / without cable: 71,0kg
- sieve hole ø mm: 8,5mm
- Pressure resistance max.: 25m
- Cable length: 20m
Overview thread size in inch to the corresponding Storz coupling
| 2" AG pressure couplings |
Storz-C coupling with 2" IT |
| 3 " AG pressure support |
Storz-B coupling with 3" IT |
| 4" AG pressure support |
Storz-A coupling with 4" IT |
| 6" AG pressure socket |
Storz-F coupling with 6" IT |
Scope of delivery: Including Storz coupling suitable for the external thread (=AG) of the pressure connection, 20 meter cable and the corresponding motor protection plug (CEE16A or 32A, thermal release, magnetic release, rotating field control and phase inverter).
Note: Please specify which motor protection plug you need 16A or 32A when ordering .
1 unit of quantity corresponds to 1 piece.
The pictures shown are for reference only, the actual product may differ.
