Gann Hydromette BL Compact - Combi Set 1

Gann Hydromette BL Compact - Combi-Set 1

Item number: 30022000

Combi-Set 1 consisting of BL Compact, BL Compact B 2 and BL Compact TF-IR 2 in Combi-Case 1

---

Technical description Hydromette BL Compact

The BL Compact is an electronic moisture meter for various types of wood as well as soft building and insulating materials.

The measuring tips are pressed into the respective material to be measured and enable the moisture to be recorded in sawn timber, chipboard, veneers and wood fiber materials (up to max. 25 mm thickness) as well as in normal gypsum and mixed plasters.

After the measurements, the minimum and maximum values per building material can be retrieved in the memory.

The instrument is supplied complete with battery, spare tips, protective cap and plastic box.

Measuring ranges

Wood moisture:
6 - 25 % (atro)

Building moisture:
0.4 - 6.0 % by weight

Properties

• Handy pocket-sized moisture meter for lightning-fast single or serial measurements
• Direct display of wood and building moisture in wt.-% via the 3-line LCD display, resolution: 0.1 % and 0.1° C respectively
• Four-step wood type correction
• Characteristic curves for 3 building material types and 2 insulation/insulation materials
• Min, max and hold function for the measured values
• Display of device or ambient temperature
• Automatic instrument switch-off
• Power supply: 9 V block battery
• Housing dimensions: 175 [L] x 50 [W] x 30 mm [H], weight approx. 160 g
  Total length: approx. 195 mm (with protective cap)

---

Technical description Hydromette BL Compact B 2

The BL Compact B 2 is an electronic building moisture indicator for non-destructive measurement of moisture in building materials.

The Hydromette works according to the dielectric constant/high frequency measuring principle. The flexible spherical probe is used to detect moisture in building materials of all kinds and to detect moisture distribution in walls, ceilings and floors.

The device has an acoustic warning signal that sounds when an alarm value is exceeded that can be set individually for each building material. The hold function facilitates measurements in hard-to-reach places.

An ideal pre-test device for all CM devices, resistance measuring devices and other material-destructive measuring methods.

The device is delivered complete with battery and plastic box.

Measuring ranges

Building moisture:
0 - 199.9 digits Scan range.
0.3 - 6.0 wt.%
0.3 - 4.0 CM-%

Properties

• Handy pocket-sized moisture meter for lightning-fast single or serial measurements
• Direct display of the building moisture in wt.-% and in CM-% via the 3-line LCD display, resolution: 0.1 %
• Characteristic curves for 7 types of building materials
• Min, max and hold function for the measured values
• Acoustic alarm function when exceeding a user defined limit value
• Automatic calibration when instrument is switched on
• Automatic instrument switch-off
• Power supply: 9 V block battery or Ni-Cd rechargeable battery (optional accessory)
• Housing dimensions: 175 [L] x 50 [W] x 30 mm [H], weight approx. 170 g
  Total length: approx. 200 mm

---

Technical description Hydromette BL Compact TF-IR 2

The BL Compact TF-IR 2 has sensors for infrared measurement of surface temperature as well as for measurement of air temperature and relative humidity.

This combination of different measuring methods enables the TF-IR 2 to quickly and reliably assess dew point undershoots or to detect borderline situations on surfaces such as walls, ceilings, floors as well as window and balcony door lintels.

In addition to the measured value display, the device has an acoustic signal for locating critical surface temperatures.

If used in time, this can prevent mold growth or reliably assess the occurrence of condensation dampness.

The sensor is interchangeable. Therefore, several measuring sensors (pluggable TF-Sticks) can be attached to different measuring points and these can be interrogated quickly one after the other while avoiding longer adjustment times.

The device is delivered complete with the TF-Stick 16 K-25, battery and plastic box.

Measuring ranges

Measuring range TF-Stick 16 K-25

Humidity:
0 - 100 % r.h.
± 1.8 % r.h. (10 - 90 % r.h.) (*)

Temperature:
-20 - +80 °C
± 0.2 °C (10 - +60 °C) (*)

Infrared measuring range
-40 to +240 °C
± 0.5 °C (0 - +60 °C)

at ambient temperatures 0 to 50 °C (*)

(*) = Sensor accuracy

Features

• Handy combination meter with infrared surface temperature, air temperature and humidity sensors for lightning fast single and serial measurements
• Simultaneous display of up to three measured values on the 3-line LCD display, resolution: 0.1 % or 0.1° C
• Automatic calculation of dew point temperature and wood moisture equilibrium (UGL)* as well as display of absolute humidity in g/m³
• With integrated laser pointer for measurement spot marking and adjustable emission factor from 20 - 100 %
• In addition to the measured value display, the instrument has an acoustic signal for locating critical surface temperatures
  • The shorter the signal intervals, the closer the dew point temperature is approached and the more endangered the area in question is for mold growth or infestation.
  • A continuous tone indicates the acute danger of mold growth, since water from the air can condense at the affected area if the temperature falls below the dew point temperature
• additional TF-Sticks for special requirements with different filter types available
• USB interface for measured value transfer to a PC with DIALOG BL+ software (for long-term measurements or process monitoring)
• Min, max and hold function for the measured values
• Storage of the 5 last measured values
• Automatic instrument switch-off
• Power supply: 9 V block battery
• Housing dimensions: 180 [L] x 50 [W] x 30 mm [H], weight approx. 220 g
  Total length incl. TF-Stick: approx. 210 mm

Scope of delivery

• Hydromette BL Compact
• Hydromette BL Compact B 2
• Hydromette BL Compact TF-IR
• Case

---

One unit of quantity corresponds to 1 piece!
Pictures may contain optional Accessories.
The pictures shown are for reference only, the actual product may differ.